Aluminium Tube 3003 O Φ9.6mm Automobile Cooling System Radiator
About the alloy material
3003 is an AL-Mn alloy, which is the most widely used type of
rust-proof aluminum. The strength of this alloy is not high
(slightly higher than that of industrial pure aluminum), and it
cannot be strengthened by heat treatment, so cold working methods
are used to improve its mechanical properties.
Mechanical properties
Tensile strength: σb (MPa) 142-178
Conditional yield strength: σ0.2 (MPa) ≥ 115
Specimen size: all wall thickness
Note: room temperature longitudinal mechanical properties of pipe
Why Aluminum Tubing is Chosen Instead of Copper Tubing to Construct
Car Radiator Cooling Systems
Aluminum in Car Radiator Cooling Systems
Unnecessary weight in hybrid and electric vehicles increases fuel
consumption and reduces battery capacity and life. Reducing the
weight of the car body structure has the most potential, but you
can also reduce weight in the cooling system.
Aluminum and Copper in Car Radiator Structures
Aluminum is an excellent conductor of heat and electricity and is
about three times as dense as copper. On the basis that their
efficacy performance is the same, this means that replacing copper
with aluminum in an Car Radiator cooling system can reduce the
weight of the system by at least 50%.
Future Copper Price Increases Will Make Aluminum Tubes More
Affordable
Analysts are predicting a growing shortage of copper due to its
critical importance in enabling decarbonization and the use of
renewable energy sources. The market will face a tight supply of
copper in the future, and the price of copper will rise by more
than 60% in the next four years.
Aluminum, on the other hand, is much less expensive than copper and
is more transparent in terms of price trends (i.e. less volatile).
In terms of technological advancement, even though it is currently
only two-thirds as conductive as copper, researchers believe that
by changing its metal structure it will be able to win more markets
in the future.
These are the areas where aluminum fits in:
* Car radiators
* Busbars
* Battery cables
* Backbone technology
* Module connections in electric vehicles
Techical Parameters:
Radiator Aluminum Alloy Tubing
Model Number | State | Coil |
Outside Diameter /mm | Wall Thickness/mm |
| 3003,3103 | M(O) | 4-22 | 0.2-2 |
| H12 |
| H14 |
(Technical requirements refer to national standards or customer
technical quality requirements for production)
HOW TO ORDER
Firstly,here is a more detailed product description about Aluminum
Tubes for Car Radiaror(Automotive Water Tanks).
Car
Radiaror-PP.pdf
You can then find a form at this link to download and fill out the
basic information.
Send it to the specified e-mail address and our engineers will
quote you according to the technical parameters.
http://mao.ecer.com/test/al-tubes.com/cases/how-to-order-15643.html
