Aluminum 3003 H14 Aluminum Alloy 3 Series Φ5 mm Aluminum Alloy
Product Description:
The aluminum alloy tube used in heat exchanger mainly produces 3
series aluminum alloy, 1 series aluminum alloy, 6 series aluminum
alloy, 5 series aluminum alloy.
This product is mainly used for various cooling heat exchange
tubes. Widely used in air conditioning, refrigerators, heating and
air conditioning equipment. We use high quality remelted bar,
source control quality, large tonnage extruder, high extrusion
ratio extruder, hot extrusion cold drawing mode of production,
multi-channel product quality inspection to ensure product quality,
to provide customers with the best quality products.
In the production process, strict quality control, and the use of
advanced production technology and special heat treatment
technology. To provide customers with the most stable quality
products. Our company is specialized in the production of various
specifications of aluminum coil and aluminum straight tube,
suitable for a variety of refrigeration and heat exchange equipment
and other industries required equipment.
Features:
3003 aluminum alloy manganese content is generally controlled in
1.0% ~ 1.5% , is heat treatment can not strengthen aluminum alloy.
Its outstanding features are corrosion resistance, electrical
conductivity, thermal conductivity, and has good reflectivity,
non-magnetic, weldability and processability, etc. , therefore, it
is widely used in all kinds of heat exchanger, manufacturing
kitchen utensils and food, storage devices of chemical products,
tanks for transporting liquid products, pressure tanks, aircraft
fuel tanks, oil line pipes, anti-theft caps and covers, etc. .
The company has advanced automatic production equipment, we have
the leading compound molding production line, complete hot
extrusion, compound molding, drawing, drawing, heat treatment,
straightening and cutting, wound detection and other production
equipment and advanced testing equipment. With an annual output of
more than 10,000 tons of various specifications of high-performance
high-reliability heat exchange aluminum tube production capacity.
The company has a strong technical force, a leading technical r & D
capabilities and years of experience in industrialization of the
core team, research and development laboratories have been set up
with universities and research institutions such as Xi'an Jiaotong
University, Nankai University and the University of Changzhou.
Techical Parameters:
Heat Exchanger Aluminum Tube
The main production specifications are listed as follows:
| Model Number | State | Wall Thickness mm | Tensile Strength MPa | Non-proportional Elongation Strength MPa | Elongation After Break A50mm |
| 1050 1060 1070 1050A | O | ≤20.00 | 60~95 | ≥70 | ≥25.00 |
| H14 | ≤10.00 | 100~135 | ≥70 | ≥5.00 |
| 3003 3103 3A21 | O | ≤20.00 | 95~130 | ≥35 | ≥25.00 |
| H12 | ≤15.00 | 115~150 | ≥75 | ≥12.00 |
| H14,H24 | ≤10.00 | 135~165 | ≥110 | ≥6.00 |
| H28 | ≤3.00 | ≥180 | ≥145 | ≥3.00 |
The specifications in the form can be customized according to
customer's requirements.
Applications:
Condensator
Evaporimeter
Air-conditioning
Icebox
Home freezer
Industrial freezer
Cold storage with cold exhaust pipe
Small warm wind
Lipstick shell
Eyebrow pen shell
Air conditioning connection pipe
Car water tank connecting pipe
Car air-conditioning connection pipe
Microchannel heat exchanger connecting tube
etc.
Production Process:
Coil pipe
Raw material procurement-inspection-cleaning-extrusion-coiling-heat
treatment-flaw detection -forming-inspection-finished product
packaging
Stright pipe
Raw material
procurement-inspection-cleaning-extrusion-coiling-straightening-flaw
detection-fine cutting-cleaning-heat treatment-inspection-finished
product packaging
Support and Services:
We support and provide technical services for the use of aluminum
pipes and assist customers to solve the production problems arising
during the actual use process. Including the performance detection
of aluminum pipe, technical analysis, the use of the back channel,
aluminum pipe welding, aluminum pipe pipe, aluminum pipe bending,
finished product leakage detection, etc., at the same time in the
use of related problems, we will also assist customers to solve
problems in the first time. And make corresponding adjustments
according to the actual situation.
FAQ.:
Q1: What kind of material alloy is the product?
A1: Currently, there are 1 series, 3 series, and 6 series aluminum
alloy.
Q2: What state and performance of the aluminum pipe can be
produced?
A2: can produce from hard state to soft state and interval
performance products
Q3: Can I customize the product specifications and requirements?
A3: Different specifications and states can be customized according
to the requirements, such as fixed ruler straight pipe and coil
pipe
Q 4: What is the minimum starting order volume?
A 4: The minimum order volume is 3 tons.
