Φ12.3 Corrosion Resistance High Heat Transfer Performance Condensed
Louver Aluminum 32*27.71mm
Product description:
The function of window wing
Finned tube is a kind of wall with ribs, which is widely used in
power, chemical industry and so on. It has a significant effect on
expanding heat transfer area and promoting turbulence.
The fins provide the additional surface area needed to efficiently
transfer heat from the fluid tube side to the gas on the fin side.
It plays a vital role in the heat exchanger itself.
Finned radiator is one of the most widely used heat exchangers in
gas and liquid heat exchangers. It can enhance heat transfer by
adding fins on the common tube.
All finned enhancement concepts improve heat transfer performance
through air turbulence and increased surface area, and their
effectiveness may differ in some important considerations.
Features:
Common designs for louvered fins
Fins constitute the basic heat transfer components, aimed at
expanding the heat transfer area, improve heat transfer efficiency.
Finned tube heat exchangers are also often used to heat or cool the
gas outside the tube, and through the tube with steam or water,
such as air cooler, boiler economizer, radiator, etc. .
Thee ordinary louvre fin has notches in the same direction, which
are designed to enhance air turbulence in a single direction. As
the severity of the shutter angle increases, its heat transfer
performance improves until it reaches a specific point beyond which
its efficiency begins to decline.
A noteworthy aspect of louver fins is their directionality, which
must be taken into account.
Heat transfer: Excellent
Fouling/clean ability: Poor
Durability: Moderate
Original louver fins
Original louver fins have different fin types to adapt to different
heat transfer. It also allows for simplified geometry and enhanced
heat dissipation and minimum pressure drop.
Yun Neng Group company:
We can provide technical support and services for the use of
Aluminium Tube, including technical guidance, production assistance
and so on. Our experienced technicians can help you solve any
problems you may encounter with your products.
Techical Parameters :
Tube-fin type air conditioning condenser and evaporator
Specifications
| Fin mold | Pattern/mm | Fin type |
| Φ7 | 21*12.7 | Louver | Raised lance | Lance | Flat |
| Φ7 | 21*18.19 | louver | Raised lance | Lance | V-wave |
| Φ7.94 | 21*21.65
| louver on waffle | V-wave | | |
| Φ10.2 | 20*15.5
| Turbolator
| | | |
| Φ12.3 | 25*21.65
| Turbolator
| | | |
| Φ12.3 | 32*27.71
| Turbolator
| | | |
| Φ14.3 | 34*29.5 | Turbolator
| | | |
| Φ14.3 | 34*29.5 | Raised lance | | | |
| Φ25.45 | 64*32 | Upper&lower lance | | | |
| Φ25.5 | 66.6*32.25 | Raised lance | | | |
| Φ9.52 | 25*21.65 | Louver | | | |
Support and Services:
Fin, micro-channel cooling tube and collector tube can be
customized according to customer's special requirements, product
width can be customized, length and direction can be arbitrarily
adjusted to meet different application scenarios.
FAQ:
Q1: What kind of material alloy is the product?
A1: At present, it can produce 1 series industrial aluminum alloy,
3003 and 3103 aluminum manganese alloy, and 6 series aluminum
alloy.
Q2: What state and performance of the aluminum pipe can be
produced?
A2: can produce from hard state to soft state and interval
performance products
Q3: Can I customize the product specifications and requirements?
A3: Different materials and products with different requirements
can be customized according to the requirements
Q 4: What is the minimum starting order volume?
A 4: The minimum order volume is 3 tons.
