FMC/FME Micro-Channel Condenser Reliable Aluminium Corrosion
Resistance Of Aluminum 0395
Product description:
FMC/FME is a new type of micro-channel heat exchanger developed to
address the problems of condensation and frost melting water that
are difficult to discharge from conventional single-cooling
parallel flow (PFC), as well as the uneven distribution of the
refrigerant gas-liquid two-phase, which is unable to meet the
problem of heat pump air conditioners with both condensation and
evaporation functions.
Multiple refrigerant distribution programme
Each zone arranges a different number of porous flat tubes in
parallel in the direction of gravity based on the state of the
refrigerant in the two-phase and the demand of heat exchange. The
header tubes at both ends and the partition plate in the middle
divide the porous flat tube into multiple zones. The refrigerant
flows back and forth in each zone to form a
condensation/evaporation circuit.
The design of the refrigerant distribution program takes into
account the different needs and characteristics of the system.
Features:
Reliability
Products for the entire aluminium alloy, compared with copper tube
aluminium fin heat exchanger material between the potential
difference is small, potential corrosion is small, but aluminium
resistance to environmental corrosion is poorer than copper, so in
order to comply with the use of air-conditioning products cycle,
through the different aluminium alloys (porous micro-channel tubes,
aluminium fins, the header tubes)
The combination of passivation and hydrophilic coating improves the
overall corrosion resistance of aluminum alloy materials.
Application of refrigerant and cost savings
Can be used with a variety of refrigerants; high-pressure
refrigerant tube small micro-channel considerably decreases tube
volume, allowing for refrigerant savings.
Techical Parameters:
Manufacturing materials-Header
| Fin size | Pitch | Notch |
Φ25×1.5T
| 10.5/7.7
| 20×2.1/20×2
|
Φ32×1.8T
| 10.5
| 25.4×2
|
Φ38×2.2T
| 10.5
| 32×2
|
New Header1
| 10.5/7.7
| 20X2.1/20X2/25.4X2
|
New Header2
| 10.5/7.7
| 20x2.1/20x2/25.4x2
|
Manufacturing materials-Porous micro-channel tubes
| Height/mm | Width/mm | Number of holes |
| 2.1 | 20 | 16 |
| 2.0 | 25.4 | 26/20/13 |
| 2.0 | 32 | 32/13 |
| 2.0 | 20 | 16/15/12 |
Applications:
Household heat pump and air-conditioning condenser;
Commercial multi-line evaporator, condenser;
Commercial heat pump system (module machine) evaporator;
Bus and car air-conditioning evaporator, condenser;
Commercial air-conditioning duct machine evaporator;
Electric locomotive, rv, truck, engineering vehicle condensers,
evaporator;
New energy vehicle air conditioning condenser, evaporator...
Etc.
